MSL Rollers series - Technical data

Characteristics
The series MSL is designed using a steel tube swaged over at either end to join the steel end caps in mechanical harmony. The bearing housing is precision finished with a tolerance of
ISO M7.

The bearings are of type 6202 rigid radial ball race of the best market supply, with ample grease chamber provided within the roller seal.

Lubricated for life with a lithium based grease that provides anti-ageing and water-repellent qualities.

The bearing protection is of a similar arrangement to that used in the MPS rollers and is know as MECA-BLOCK.

The steel spindle is Ø 15 mm, drawn and calibrated in the standard design, provided with a locking bush that has spanner flats (ch = 17). The use is normally restricted within the temperature range from -20°C to +100°C.

Given that the method of joining the tube with the end caps is by swaging (not welding) it is advisable to use these rollers in medium severe environments where there is little presence of water.
Thanks to optimum balancing and strong construction these rollers may be employed at loads and speeds similar to those of series MPS. The roller series MSL offers a good cost effective solution.